| |
| 1. Determine the Weld Type required : |
| a. |
Know the application to determine what materials are to be welded. |
| |
|
| b. |
Refer to Selector Chart for correct weld type. |
| |
|
| c. |
Find the appropriate Weld Type. |
|
| |
| 2. Determine the Correct Mold # |
| a. |
Determine the Conductor Sizes, Ground Rod or Surface to be welded. |
| |
|
| b. |
Locate each of the above to fine the correct Mold #. |
|
| |
| 3. After Determining the connect Mold # Verify the Following : |
| a. |
Price key - Find the price of the mold by crossing it on the price lists. |
| |
|
| b. |
Weld Metal (size) needed to make the weld. |
| |
|
| c. |
Handle Clamps required for the mold. |
| |
|
| d. |
Packing Materials (if needed.) |
| |
|
| e. |
See Notes - for other accessories needed or suggested to make this connection. |
|
| |
| Please check to make sure you have the following to make proper weld : |
| 1. |
Mold that fits your application |
| |
|
| 2. |
Weld Metal required by the mold. |
| |
|
| 3. |
Handle Clamps or frame. |
| |
|
| 4. |
Flint Igniter - (Low emission molds require a battery pack in place of the flint igniter). |
| |
|
| 5. |
Sleeves, packing or other accessories required or suggested. |
|
| |
| |
For sales, Service and Technical Support please contact us or
visit our website : www.speedwellindustries.com |
| |
